Wire Sawing

Some concrete is simply too thick, too heavily reinforced or too awkwardly placed for a standard saw to get through. That’s where diamond wire sawing comes in.

Instead of a blade, we run a diamond-beaded wire in a loop through the concrete, driven by a hydraulic machine set up beside the job. The wire pulls its way through, cooled by water the whole time, and it doesn’t much care how thick the material is or what shape it’s in.

We use it on the jobs nothing else will touch: bridge and civil structures, heavily reinforced columns and beams, thick footings, sea walls, pool surrounds, oversized slabs, stone, and pieces that need to come out in one clean lift rather than be broken up.

It’s a service for builders, civil contractors, engineers, demolition crews and project managers, and just as often for homeowners and renovators who’ve hit something a hand saw was never going to handle.

If you’re not sure whether your job needs a wire saw or something simpler, ring us and we’ll tell you straight. 

Diamond Wire Sawing | Complete Concrete Cutting

Depth

Cuts through concrete, reinforced steel, stone and other materials with no practical depth limit.

Access

Works around obstructions, at height, underwater and in tight or confined spaces.

Uses

Ideal for bridges, columns, beams, footings, sea walls, pools and oversized slabs.

Finish

Creates clean, precise cuts with minimal noise, dust and vibration.

What diamond wire cutting actually does

 Diamond wire sawing uses a steel cable fitted with industrial diamond beads. We feed it through a small entry hole, form a loop and run it around a drive wheel. The machine spins the wire through the material, while water keeps it cool and controls dust.

Key benefits include:

  • No practical cutting depth limit
  • Works at height, underwater and in confined spaces
  • Cuts through reinforced concrete, mesh and thick rebar
  • Produces clean, square cuts with minimal vibration
  • Removes large sections in one piece, reducing mess and patching

When you'd call us for a concrete wire saw

We get called out for concrete wire cutting when the job is one of these:

  • Bridge decks, headstocks, abutments and other civil structures
  • Thick reinforced columns, beams, piers and footings
  • Sea walls, retaining walls, culverts and stormwater structures
  • Pool removals and pool surround alterations
  • Oversized slabs and machine bases coming out of industrial sites
  • Large openings through walls too thick for a track-mounted wall saw
  • Stone and rock, including sculptural and landscape work
  • Staged demolition where sections need to come out one at a time without disturbing what’s around them
  • Anywhere vibration, noise or dust needs to be kept to a minimum, like a live site, a hospital, a school or a residential street

How a wire sawing job runs

Call us or send through the job details, including photos and rough measurements if you have them. We’ll inspect the site for free, check the access and concrete, then provide a clear quote. Once approved, we’ll plan the cutting and removal, complete the work with minimal dust, and leave the site clean and ready for the next stage.

What diamond wire cutting actually does

Diamond wire sawing uses a steel cable fitted with industrial diamond beads. We feed it through a small entry hole, form a loop and run it around a drive wheel. The machine spins the wire through the material, while water keeps it cool and controls dust.

Key benefits include:

  • No practical cutting depth limit
  • Works at height, underwater and in confined spaces
  • Cuts through reinforced concrete, mesh and thick rebar
  • Produces clean, square cuts with minimal vibration
  • Removes large sections in one piece, reducing mess and patching

When you'd call us for a concrete wire saw

We get called out for concrete wire cutting when the job is one of these:

  • Bridge decks, headstocks, abutments and other civil structures
  • Thick reinforced columns, beams, piers and footings
  • Sea walls, retaining walls, culverts and stormwater structures
  • Pool removals and pool surround alterations
  • Oversized slabs and machine bases coming out of industrial sites
  • Large openings through walls too thick for a track-mounted wall saw
  • Stone and rock, including sculptural and landscape work
  • Staged demolition where sections need to come out one at a time without disturbing what’s around them
  • Anywhere vibration, noise or dust needs to be kept to a minimum, like a live site, a hospital, a school or a residential street

How a wire sawing job runs

Call us or send through the job details, including photos and rough measurements if you have them. We’ll inspect the site for free, check the access and concrete, then provide a clear quote. Once approved, we’ll plan the cutting and removal, complete the work with minimal dust, and leave the site clean and ready for the next stage.

A recent job: a 40-tonne rock in Maleny

This one was part precision work, part creative collaboration, and it involved one very big rock.

Our team headed up to Maleny to wire saw straight through the full diameter of a 40-tonne rock for Australian sculptor Chris McKenzie, known as Australia’s Creative Cowboy. Chris is transforming the rock into a large public sculpture for council, and needed the stone prepared for its next chapter.

It was the first time our wire saw had been used on a project quite like it, and it showed just how versatile the equipment is once you take it off the usual concrete work. 

The point for anyone reading this: if a 40-tonne rock is within reach, a footing, a sea wall or a slab almost certainly is.

Diamond Wire Sawing 40-tonne rock
Complete concrete cutting

Why choose Complete Concrete Cutting

With over 25 years on the Sunshine Coast, our local Marcoola team has the training and experience to handle complex wire sawing jobs safely. We use water cooling and dust suppression on every job to control silica dust and deliver clean, square cuts with less patching required. We also provide free on-site estimates, clear quotes with no call-out fee, and respond to every enquiry within 24 hours. No job is too big or too small.

Service Areas

We’re based at Marcoola and work right across the Sunshine Coast, from Caloundra and Kawana up through Maroochydore, Mooloolaba, Coolum and Noosa, inland to Nambour, Buderim and the Hinterland towns like Maleny and Montville.

We also cover Gympie, Moreton Bay and North Brisbane. Wire sawing gear travels, so if your job sits a bit outside those areas, give us a call and we’ll let you know if we can get to it.

FREQUENTLY ASKED QUESTIONS

What is diamond wire sawing?

It’s a method of sawing through concrete, stone and masonry using a wire threaded with industrial diamond beads. The wire runs in a continuous loop driven by a hydraulic machine, cooled by water, and works its way through the material. It’s used where a blade can’t reach or where a clean removal matters.

There’s no real depth limit with a concrete wire saw. Because the loop can be made as long as the job needs, thickness stops being the deciding factor. Access, anchoring and how the piece comes out are usually what shape the job instead.

A track-mounted wall saw runs a circular blade along a rail and handles concrete up to around 500mm. Once you’re past what a blade can reach, or the shape is irregular, wire sawing takes over. For a straight doorway or window opening, a wall saw is usually the better and quicker choice.

Yes. Reinforcing steel, mesh and post-tensioned slabs are all within reach of diamond wire cutting. The diamond beads go through steel and concrete alike.

Yes. Wire sawing is one of the few methods that works submerged, which is why it turns up on sea walls, marine structures, pools and stormwater work.

It’s about as gentle as concrete removal gets. There’s no hammering and very little vibration, so the surrounding structure isn’t shock loaded. That’s the main reason it gets used on live sites, heritage work and anything structurally sensitive.

We do. Most home jobs are better suited to hand sawing, ring sawing or floor sawing, but wire sawing comes into its own on pool removals, thick footings, sea walls and heavy retaining structures. If you’re not sure which one your job needs, ring us and we’ll work it out with you.

It depends on the thickness, the access, what’s inside the concrete and how the sections need to come out, so we won’t guess at it over the phone. We come out, look at the job and give you a firm quote. The estimate is free and there’s no call-out fee.

For most private work on your own property, no. It gets more involved with public land, structural elements and load-bearing walls. If you’re not sure which side of the line your job sits on, give us a bell and we’ll talk it through.

 Call us on 07 5442 2222 or email info@cccqld.com.au. Tell us where the job is and roughly what’s involved, and we’ll book a time to come and have a look. Free estimate, no obligation, no call-out fee.